22
05 Installation User Manual V1.0-2023-03-20
Step 1 Install the handles or hoist rings to the sides of the inverter.
Step 2 Grab the handles to lift or hoist the inverter to place it on the mounting plate.
Step 3 Tighten the nuts to secure the mounting plate and the inverter.
Lifting the Inverter
3
M6
2~3N·m
5.2.3 Installing the Inverter
CAUTION
Follow the instructions below to avoid personal injury or equipment damage:
• Consider the weight of the equipment before moving it. Assign enough personnel to move
the equipment to avoid personal injury.
• Make sure all four handles are securely mounted and can withstand the weight of the
equipment.
• Grab the handle only when moving the equipment. Never use the terminals or base as a
handle.
1
2
Weight
2
1
To Next Page
