Need help?Do you have a question about the Goodwe DNS and is the answer not in the manual?
General| Number of MPPTs | 2 |
|---|---|
| AC Voltage Range | 180-280 V |
| Total Harmonic Distortion (THD) | < 3% |
| Euro Efficiency | 97.5% |
| Protection Degree | IP65 |
| Cooling Method | Natural Convection |
| DC Switch | Yes |
| Model | DNS |
| Nominal AC Voltage | 230 V |
| Nominal Grid Frequency | 50 Hz / 60 Hz |
| Power Factor | 0.8 leading - 0.8 lagging |
| Operating Temperature Range | -25°C to 60°C |
| Communication | RS485 |
General disclaimer about the guide's information and limitations.
Safety warnings and recommendations for DC, AC, and inverter sides.
Identifies and lists the physical components of the inverter.
Provides the physical measurements and diagrams of the inverter.
Lists and illustrates the components included in the inverter package.
Details the necessary environmental and spatial conditions for inverter installation.
Specifies the permissible mounting angles for the inverter.
Step-by-step visual guide for physically mounting the inverter onto a wall.
Instructions for properly connecting the protective earth (PE) cable.
Details the process for connecting the AC output cable, including connector types.
Step-by-step instructions for connecting the DC input cables.
Guides for connecting DRED, CT, and RS485 optional communication cables.
Instructions for installing optional communication modules like WiFi.
A checklist of essential checks before powering on the inverter.
Steps for powering on the inverter and observing status indicators.
Detailed steps for setting the safety country and configuring the inverter using the LCD.
Guide for commissioning the inverter using the SolarGo mobile application.
To Next Page
