EasyManua.ls Logo

Goodwe DNS G3 Series User Manual

Goodwe DNS G3 Series
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User Manual
V1.0-2022-03-22
Grid-Tied PV Inverter
DNS G3 Series
Question and Answer IconNeed help?

Do you have a question about the Goodwe DNS G3 Series and is the answer not in the manual?

Goodwe DNS G3 Series Specifications

General IconGeneral
Max DC Voltage550V
Number of MPPT2
CoolingNatural convection
Warranty5 years
Output Power5000W
Nominal AC Voltage230V
AC Output Frequency50Hz/60Hz
Operating Temperature Range-25°C to 60°C
Protection ClassIP65
CommunicationRS485

Summary

Manual Overview

Applicable Models

Lists the specific inverter models covered by this manual.

Target Audience

Identifies the intended readers of this user manual.

Symbol Definitions

Explains the meaning of various warning and notice symbols used in the manual.

Manual Updates

Details the revision history and updates made to the manual.

Safety Precautions

General, DC, and AC Safety

Covers essential safety guidelines for general operation, DC, and AC sides.

Installation and Personnel Safety

Details safety during installation and requirements for personnel.

EU Declaration of Conformity

States compliance with relevant European directives for the inverter.

Product Overview

Application, Circuit, and Grid Types

Describes application scenarios, circuit diagram, and supported grid types.

Inverter Appearance and Components

Provides a visual overview of the inverter's external features and components.

Handling and Storage

Receiving and Deliverables Check

Instructions for inspecting the product and packaging upon delivery.

Storage Guidelines

Guidelines for storing the inverter when not in immediate use.

Installation Guide

Installation Site Requirements

Specifies environmental and site conditions necessary for safe installation.

Inverter Mounting Procedure

Details the procedures and methods for physically installing the inverter.

Electrical Connections

Connection Safety and PE Cable Wiring

Crucial safety measures before connection and instructions for the PE cable.

PV Input and AC Output Wiring

Detailed steps for connecting solar panel DC input and AC output cables.

Communication Module Setup

Overview of communication options and setup for the inverter.

Equipment Setup and Commissioning

Pre-Power ON Checks and Power Up

Pre-commissioning checks and steps for safely powering on the inverter.

System Configuration and Monitoring

Indicators, Buttons, and LCD Navigation

Explains indicators, buttons, LCD navigation, and parameter introduction.

Parameter Setting and Firmware Update

Guide to setting parameters via LCD/App and upgrading firmware.

Maintenance and Troubleshooting

Inverter Power Off, Removal, and Disposal

Steps for safely shutting down, removing, and disposing of the inverter.

Troubleshooting Common Issues

Methods and information for diagnosing and resolving common inverter issues.

Routine Maintenance Procedures

Scheduled tasks for maintaining the inverter's performance and longevity.

Related product manuals