Goodwe DNS G3 Series User Manual

System Commissioning
30
User Manual V1.0-2022-03-22
8.2 Setting Inverter Parameters via LCD
NOTICE
• Inverter rmware version shown in this document is V1.00.00. Coummunication version:
V1.00. The screenshots are for reference only. The actual interface may dier.
• The name, range, and default value of the parameters are subject to change or adjustment.
The actual display prevails.
• To prevent the generating capacity from being inuenced by wrong parameters, the power
parameters should be set by professionals.
Examples:
• Stop pressing the button for a period on any page, the LCD will get dark and go back to the
initial page.
• Short press the button to switch menu or adjust parameter values.
• Long press the button to enter the submenu. After adjusting the parameter values, long
press to set it.
LCD Button Description
Long press
for 2s
Long press
for 2s
Long press
for 2s
Short press
to adjust the
hundreds
Short press
to adjust
the tens
Short press
to adjust
the units
Long press
for 2s
Long press
for 2s
Long press
for 2s
Long press
for 2s
Long press for 2s
Long press
for 2s
Short press
Short press
Short press
Short press
Short press Short press
Set language
Set Safety
PF Adjust
SetModbusAddr
SetModbusAddr
X-X-X
SetModbusAddr
X-X-X
SetModbusAddr
X-X-X
SetModbusAddr
X-X-X
SetModbusAddr
Yes?
SetModbusAddr
Return
SetModbusAddr
Modify Success
Set language
Chinese
Set language
English
Set language
Return
Set language
Modify Success
Set language
Modify Fail

Goodwe DNS G3 Series Specifications

General

Brand	Goodwe
Model	DNS G3 Series
Category	Inverter
Language	English