105
Unspecified: Do not change BMC parameters
Static: BIOS static IP settings
DynamicBmcDhcp: BMC runs DHCP to dynamically assign IP
DynamicBmcNonDhcp: BMC runs Non-DHCP protocol to dynamically assign IP
Default: Unspecified
Modify the parameters from Unspecified to other parameters. After saving and restarting, the options
will be restored to the Unspecified value, and there is no need to configure the BMC IP each time the startup
process is performed.
When the Configuration Address source option is Unspecified, it will display the network parameter
information (IPV4) of the system shared network port, the current IP configuration method, BMC IP, subnet
mask, MAC address, routing IP, routing MAC;
BMC Dedicated Management Channel
Configuration Address source
To configure the BMC IP address allocation mode, the menu options are:
Unspecified: Do not change BMC parameters
Static: BIOS static IP settings
DynamicBmcDhcp: BMC runs DHCP to dynamically assign IP
DynamicBmcNonDhcp: BMC runs Non-DHCP protocol to dynamically assign IP
Default: Unspecified
Modify the parameters from Unspecified to other parameters. After saving and restarting, the options
will be restored to the Unspecified value, and there is no need to configure the BMC IP each time the startup
process is performed.
When the Configuration Address source option is Unspecified, it will display the network parameter
information (IPV4) of the dedicated network port of the system, the current IP configuration method, BMC IP,
subnet mask, MAC address, routing IP, routing MAC;
Configure IPV6 support
BMC Sharelink Management Channel
IPV6 Support
Choose whether to support IPV6, the menu options are:
Enabled: Supports IPV6
Disabled: Does not support IPV6
Default: Enabled
Modify the parameters from Unspecified to other parameters. After saving and restarting, the options
will be restored to the Unspecified value, and there is no need to configure the BMC IP each time the startup
process is performed.
When the Configuration Address source option is Unspecified, the network parameter information
(IPV6) of the system shared network port will be displayed;
BMC Dedicated Management Channel
IPV6 Support
Choose whether to support IPV6, the menu options are:
Enabled: Supports IPV6
Disabled: Does not support IPV6
Default: Enabled
Modify from Unspecified to other parameters, save and restart the execution, the option will restore the
Unspecified value, without the need to configure the BMC IP every time the startup process.
When the Configuration Address source option is Unspecified, the network parameter information (IPV6)
of the dedicated network port of the system will be displayed;
To Next Page
Loading...
Need help?
General
