GoPro Hero12 - Live Streaming + Webcam Mode; Streaming and Webcam Setup

58 59
HERO12 Black Power Tools
Using HindSight
The
on the rear touch screen will let you know that HindSight is on.
Press the Shutter button
at any time to start recording.
The indicator at the top center of the screen will turn blue when the
HindSight buer is full. That means that your camera is storing the previous
15 or 30 seconds of video. It will only save the video if you press the Shutter
button
to start recording.
Heads Up: Make sure that you've locked in the capture settings you
want before starting HindSight. You won't be able to change settings
once HindSight is on.
Stopping + Pausing HindSight
You can also tap Stop HindSight at any time to cancel HindSight and save
battery power. Your camera will also pause HindSight if you have not
started recording 15 minutes after you turned HindSight on. This is another
way to conserve battery power.
Heads Up: HindSight works by capturing video the entire time that it’s
on (even when you’re not actively recording). Depending on how you
use it, HindSight may use your camera’s battery capacity faster than
recording in normal video mode.
DURATION CAPTURE
Use duration capture to set how long your GoPro records before it stops.
It’s available in Video, TimeWarp, Time Lapse, and Night Lapse modes in
increments from 15 seconds to 3 hours.
Setting Up + Using Duration Capture
1. Tap the settings shortcut
to go to the settings menu.
2. Tap Duration.
3. Use the slider to choose the duration for your shot.
4. Press the Shutter button
to start recording. Your GoPro will
automatically stop after recording for the set duration.
Heads Up: Duration capture sets how long your GoPro will record.
The length of your final video will vary based on the mode you’re using.
TimeWarp and time lapse videos will be shorter than the set duration.
PRO TIP: Choose No Limit to capture footage without a time limit.
Press the Shutter button
to stop recording.
HERO12 Black Power Tools