66 67
LIST OF VOICE COMMANDS
There are 2 types of voice commands: Action commands and
Mode commands.
Using Action Commands
These commands let you switch modes on the fly. If you just recorded
a video, you can say, “GoPro, take a photo” to snap a photo without
manually switching modes.
Action Command Description
GoPro, start recording Starts recording video.
GoPro, HiLight Adds a HiLight Tag to your video
during recording.
GoPro, stop recording Stops recording video.
GoPro, take a photo Takes a single photo.
GoPro, shoot burst Takes burst photos.
GoPro, start time lapse Starts capturing with the last time lapse
mode you used.
GoPro, stop time lapse Stops capturing time lapse.
GoPro, turn o Turns your camera o.
Using Voice Control
Using Mode Commands
Use these commands to switch capture modes on the go. Then say,
“GoPro, capture” or press the Shutter button
to get the shot.
Mode Command Description
GoPro, Video mode Switches your camera to Video mode
(does not start recording).
GoPro, Photo mode Switches your camera to Photo mode
(does not take a photo).
GoPro, Time Lapse mode Switches your camera to Time Lapse
photo mode (does not start taking time
lapse photos).
PRO TIP: If you’re recording video or time lapse, you must stop
recording by pressing the Shutter button
or by saying, “GoPro,
stop capture” before trying a new command.
Using Voice Control
To Next Page
Loading...
