GoPro Hero12 - Page 72

142 143
Tech Specs: Protune
RAW AUDIO
This setting creates a separate .wav file for your video, in addition to
the standard .mp4 audio track. You can select the level of processing
to apply to the RAW audio track.
RAW Setting Description
O (default) No separate .wav file is created.
Low
Applies minimal processing. Ideal if you want to
apply audio processing in post-production.
Med
Applies moderate processing based on the
Wind-Noise Reduction setting. Ideal if you
want to apply your own gain.
High
Applies full audio processing (automatic gain
and Wind-Noise Reduction). Ideal if you want
processed audio without AAC encoding.
Insert your SD card into a card reader to access the .wav files with your
computer. They’re saved with the same name and in the same location
as the .mp4 files.
Tech Specs: Protune
WIND-NOISE REDUCTION
Your HERO12 Black uses 3 microphones to capture sound while
recording video. You can customize how they’re used based on
conditions where you’re shooting and the type of sound you want
in your finished video.
Setting Description
Auto (default)
Automatically filters out excessive wind
(and water) noise.
On
Use to filter out excessive wind noise or when
your GoPro is mounted on a moving vehicle.
O
Use when wind will not aect sound quality and
you want to ensure that your GoPro is recording
in stereo.
TIMECODE SYNC
Timecode sync is available through the GoPro Quik app. This lets you
sync the date and time on multiple HERO12 Black cameras for easier and
more precise editing.
1. Add your HERO12 Black to the GoPro Quik app.
2. Tap
on the app's HERO12 Black control screen.
3. Tap Sync Timecode. This will bring up a QR code.
4. Scan the QR with any HERO12 Black using any mode or preset.
Your GoPro will let you know if the sync was successful.
Heads Up: After adding HERO12 Black to the app, you can access
timecode sync through the app's HERO12 Black control screen at any
time. You don't have to connect your camera.