34 GMC-I Messtechnik GmbH
14.2 Attaching the strap to the test instrument
14.3 Attaching the Test Probe Holder to the Carrying Strap
Front
Feed the strap through from the front
of the test instrument and secure it
with the slotted screw (M3).
Back
1
Bottom Right
Detach the strap from the instrument:
Turn out the slotted screw (M3) at the
bottom.
Bottom Left
Strap
Clasp
Clasp
Front View
2
Slide the strap through the test probe
holder.
Eyelet for Attachment to Tester (METRISO ...)
Side View
To Next Page
Loading...
