Need help?Do you have a question about the Gossen MetraWatt SECUTEST PRO and is the answer not in the manual?
General| Measurement Categories | CAT IV 300V, CAT III 600V |
|---|---|
| Continuity Testing | 0.01 Ω to 2000 Ω |
| Phase Sequence Test | Yes |
| Measurement Range | Varies by function |
| Display | LCD with backlight |
| Data Logging | Yes |
| Power Supply | Rechargeable battery |
| Standards | IEC 61557, VDE 0413 |
| Measurement Functions | Insulation resistance, continuity, loop impedance, line impedance, RCD testing, voltage, frequency, phase sequence |
| Insulation Resistance Measurement | 0.01 MΩ to 2000 MΩ |
| RCD Testing | 10 mA, 30 mA, 100 mA, 300 mA |
| Voltage Measurement | 0 to 600 V AC/DC |
| Frequency Measurement | 45 Hz to 65 Hz |
| Interface | USB, Bluetooth |
| Operating Temperature | -10 °C to +50 °C |
| Storage Temperature | -20°C |
Highlights critical safety warnings, usage restrictions, and protective measures.
Guides through connecting to mains and configuring essential device settings.
Details database operations, including creating, exporting, importing, and backing up data.
Covers IPE, IB, IG, IA, and IP measurements with detailed procedures.
Provides a comprehensive list of error messages and their corrective actions.
To Next Page
