GMC-I Messtechnik GmbH 69
* Skipped test steps are not shown in the abridged view – only the worst measured
value for each measurement type is shown.
Taking measuring error into consideration depends on the setting
in the setup menu in the SETUP switch position: Setup 1/3 > Auto
Measurements> BMU Considered. > Yes)
Display of Details for Individual Test Steps
➭ The display is returned to the list of test steps by pressing
the magnifying glass key.
➭ The memory screen is displayed again after acknowl-
edging the list.
10.11 Saving Test Results
➭ Save the results of a successful test sequence by
pressing the Save key.
or
Send measurement data to PC (feature KD01, “Z853S –
SECUTEST DB COMFORT”)
via USB or
Bluetooth
®
(feature M01),
e.g. for saving to IZYTRONIQ report generating software
(push-print function) (see IZYTRONIQ online help for descrip-
tion)
Observe notes regarding storage in section 7.
Filter
Icon
Meaning of the Selectable Report View
During report display:
show complete test report
During report display:
show summarized (abridged) test report *
During report display:
show failed test steps only
To Next Page
Loading...
