Need help?Do you have a question about the Gossen MetraWatt METRA HIT 22S and is the answer not in the manual?
General| Brand | Gossen MetraWatt |
|---|---|
| Model | METRA HIT 22S |
| Category | Measuring Instruments |
| Language | English |
Details the proper operational context and limitations for the multimeter, emphasizing safe usage.
Outlines essential safety features and warnings for operating the instrument safely.
Explains electrical measuring categories (CAT I-IV) and their relevance to safe measurement practices.
Lists critical safety measures to be followed during instrument operation to prevent hazards.
Describes conditions under which the instrument may be unsafe and require removal from service.
Explains how the instrument automatically selects the optimal measuring range for accurate readings.
Describes the process of manually overriding automatic range selection for specific measurement needs.
Explains how to freeze, hold, and compare measured values for detailed analysis.
Details how to record and store minimum and maximum values with associated timestamps during long-term monitoring.
Guides on setting up for voltage measurements, connecting cables, and noting safety warnings.
Discusses protection mechanisms and recommended accessories for transient overvoltages.
Outlines the use of high-voltage probes for measuring voltages exceeding 1000 V.
Details how to perform dB measurements, set reference levels, and understand input resistance.
Covers current measurement setup, fuse protection, and current type selection for specific models.
Provides practical tips for current measurements, including fuse specifications and warnings.
Guides on performing resistance measurements, including zero balancing for low resistance values.
Explains how to generate pulses and packets for signal testing purposes.
Guides on measuring capacitance, including zero balancing for small values.
Details how to perform frequency measurements, noting potential distortions from DC components.
Explains sensor type selection, cable resistance, and unit settings for temperature measurements.
Describes how to count events based on upper and lower trigger thresholds.
Explains the instrument's memory capacity and data acquisition methods for logging measurements.
Explains how to delete stored memory data and general parameters for memory operation.
Outlines fuse types, ratings, protection class, and operating voltages for safety.
To Next Page
