58 GMC-I Gossen-Metrawatt GmbH
28 Repair and Replacement Parts Service
DKD Calibration Lab*
and Rental Instrument Service
When you need service, please contact:
GMC-I Gossen-Metrawatt GmbH
Service Center
Thomas-Mann-Strasse 20
90471 Nürnberg • Germany
Phone +49-(0)-911 86 02 - 0
Fax +49-(0)-911 86 02 - 2 53
E-mail service@gossenmetrawatt.com
This address is for Germany only. Abroad, our representa-
tives or establishments are at your disposal.
* Calibration Laboratory for Electrical Quantities
DKD–K–19701accredited per DIN EN ISO/IEC 17025
Accredited measured quantities: direct voltage, direct current
values, DC resistance, alternating voltage, alternating current
values, AC active power, AC apparent power, DC power,
capacitance and frequency
Competent Partner
GMC-I Gossen-Metrawatt GmbH is certified in accordance
with DIN EN ISO 9001:2000.
Our DKD calibration laboratory is accredited by the Phys-
ikalisch Technische Bundesanstalt (German Federal Insti-
tute of Physics and Metrology) and the Deutscher Kalibrier-
dienst (German Calibration Service) in accordance with
DIN EN ISO/IEC 17025 by under registration number
DKD–K–19701.
We offer a complete range of expertise in the field of
metrology: from test reports and proprietary calibration certifi-
cates right on up to DKD calibration certificates.
Our spectrum of offerings is rounded out with free test
equipment management.
An on-site DKD calibration station is an integral part of our
service department. If errors are discovered during calibra-
tion, our specialized personnel are capable of completing
repairs using original replacement parts.
As a full service calibration laboratory, we can calibrate
instruments from other manufacturers as well.
To Next Page
Loading...
