Power on/off: Press and hold the power button for 2-3 seconds. The
display will light up, and the dirt bike will power on. Press and hold the
power button again for 2-3 seconds. The display screen will turn off, and the
dirt bike will power off.
Gear Shift: While the dirt bike is powered on, pressing the gear button will
switch the dirt bike between high (HIGH) and low (ECO) gears. This will also
release the parking mode.
If the vehicle remains stationary and inactive for 15 seconds, it will return to
parking mode automatically.
Parking Mode Release: After turning the dirt bike on, the display panel will
show the combination “P0.” Squeeze the brake lever or press the gear
button to release the parking mode. The display panel will show the
numbers “00,” and you will be able to ride normally.
Light Control: When the dirt bike is first powered on, the headlights are
turned off by default. While the dirt bike is powered on, give the gear
button a long press to activate the front and rear lights. In this state, they
will stay on continuously, and the display screen will show an illuminated
headlight icon. When the brakes are applied, the rear light will flash.
To turn off the lights and deactivate the light icon on the display, give the
gear button another long press.
Electric Dirt Bike Console Functions
11
To Next Page
Loading...
