If you regularly clean and maintain your electric scooter, it will extend
its life.
Cleaning and storage: If the scooter is dirty, wipe it clean with a soft damp cloth.
Disc Brake Adjustments: If the brake is too tight, use a 4mm Allen wrench to loosen
the screws counterclockwise. Push the brake wire to shorten and lock the screw in
place. If the brake is too loose, loosen the screws and pull the brake wire to extend the
wire and lock the screws.
Tiller Adjustments: If the tiller wiggles while riding, please check the folding
mechanism. Use an Allen wrench to tighten the screws as the gure shows.
Tires: If you notice that the tire pressure is low, please ll to the recommended PSI on
the side of the tire. Recommended PSI: 50
DO NOT use alcohol, gasoline, kerosene, or other corrosive chemical solvents to clean
the scooter. It can severely damage the appearance and structure of the scooter. Please
do not use a pressure washer as it may also cause damage to the electronics.
Storage: When you’re not using your scooter store in a dry and cool location. Avoid
storing your scooter outdoors because sun exposure can damage it’s appearance and
may cause wear on the life of the battery and tires.
Maintenance & Repair