Maintenance & Repair
If you regularly clean and maintain your electric hoverboard, it will
extend its life.
Cleaning and storage: If the scooter is dirty, wipe it clean with a soft
damp cloth.
DO NOT use alcohol, gasoline, kerosene, or other corrosive chemical solvents
to clean the hoverboard. It can severely damage the appearance and structure
of the hoverboard. Please do not use a pressure washer as it may also cause
damage to the electronics.
Storage: When you’re not using your hoverboard store in a dry and cool
location. Aviod storing your scooter outdoors because sun exposure can
damage it’s appearance and may cause wear on the life of the battery and
tires.
Troubleshooting: One of the most common solutions for hoverboard issues is
calibrating your board. Here are the steps involced in hoverboard calibration:
1. Start with the hoverboard powered off.
2. Adjust the foot pedals until they are level with each other and the ground.
3. Press and hold the power button for 10 seconds. The LED lights will flash.
4. Press the power button to turn off.
To Next Page
Loading...
Need help?
General
