9
Projector Setup
Power
Plug the AC/DC power adapter (included) into a standard wall outlet and the DC power input on the rear of the unit.
After connecting power, please allow approximately 5 seconds to pass before powering the unit ON.
USB
HDMI IN
AV IN
VGA IN
AUDIO
OUT
Projector Placement
For best results, place the projector in a dark room or other dimly lit area.
Use the unit with a dedicated projector screen for best picture resolution. If placing the projector behind the viewing
screen (unit in front of/projecting toward viewers), a special screen will be required. Projector screens are not included.
If you are not using the unit with a screen, a smooth, white or lightly colored surface will provide the best results.
Best Projector Distance:
3-12 ft. (1-3.7 M)
Remote range:
23 ft. (7 M)
Be sure to aim the
remote at the sensor on
the rear of the projector.
To Next Page
Loading...
Need help?
General
