5
possible. Using an external power source, you will not have to worry about the battery’s charge condition or
any data loss.
When the device is connected to a PC, in addition to charging, the free companion PC software can be used
to:
• Monitor the measurements on the computer screen
• Download the history data recorded through the EMF-390’s data logging feature and convert
it into a standard .csv file for further analysis.
Specifications
• EMF (Electromagnetic Field)
o Triple axis (X, Y, Z)
o Range: 0.00~500mG, 0.00 to 50µT
o Resolution: 0.1/1 mG or 0.01/0.1 µT
• EF (Electric Field)
o Range: 0V/m to 1000V/m
o Resolution: 1 V/m
o Frequency independent
• RF Field (Radio Frequency Field)
o Range: 0.02µW/m² ~ 9999mW/m²
o Resolution: 0.01μW/m², 0.1μA/m, 0.1mV/m, 0.001μW/cm², 1dB
o RF Frequency: up to 8 GHz
o up to 10 GHz (EMF-390 only)
• RF Spectrum Power Analyzer (EMF-360+V2 only)
o Frequency band: 2.4Ghz – 2.5GHz (WIFI, Bluetooth, Microwave oven, Smart meter etc.)
Frequency step: 25KHz – 405KHz
Frequency span: 58KHz – 812KHz
• RF Spectrum Power Analyzer (EMF-380V2, EMF-390 only)
o Frequency band 1: 50 MHz -65MHz (FM Radio)
Frequency step: 100KHz
Frequency span: 100KHz
o Frequency band 2: 65 MHz -76MHz (FM Radio)
Frequency step: 100KHz
Frequency span: 100KHz
o Frequency band 3: 76MHz – 108MHz (FM Radio)
Frequency step: 100KHz
Frequency span: 100KHz
o Frequency band 4: 240MHz – 1040MHz (Cell phone, Wireless phone Smart meter, etc.)
Frequency step: 1KHz – 10KHz
Frequency span: 50KHz – 4000KHz
o Frequency band 5: 2.4Ghz – 2.5GHz (WIFI, Bluetooth, Microwave oven, Smart meter, etc.)
Frequency step: 25KHz – 405KHz
Frequency span: 58KHz – 812KHz
To Next Page
