Temperature Display
GMC-SE comes installed with an internal temperature sensor.
Press the Key2 to Key4 to toggle between Fahrenheit and Celsius. Use S1 to exit the
temperature screen.
Gyroscope Data Display
The internal digital accelerometer is able to provide real-time gyroscope data. It displays
current unit X,Y,Z axis data and detected motion event. Such as single tap OR double tap.
Communication Baud Rate
This Geiger counter serial communication baud rate is selectable from following values:
1200,2400,4800,9600,14400,19200,28800, 38400,57600,115200. Pressing Key4 changes the
baud rate.
The new baud rate will take immediate effect. The new value also be saved and used on next
power up.
Reverse Display
To Next Page
Loading...