Mod. IO31/E - rev. 00
ID 120
CONTROL UNIT FOR 1 MOTOR 220V
Important: Read carefully this manual before the installation. This manual is integral part of your
product, keep it for reference.
Warnings:
First of all verify that this product is suitable for the installation.
Read carefully technical characteristic before the installation.
Installation of this control unit must be properly done by qualified installers, following rules and regulations of
installation country.
It's mandatory do periodic maintenance each 6 month.
Maintenance or repairing must be done by qualified Technicians.
Turn power off before maintenance or repairing.
This device is intended for gate automation, any other applications is strongly advised.
Not respecting of rules may cause serious damage to peoples, animals, things.
Manufacturer discharges all responsibility for missed respect of rules.
Don't let this control unit unattended or where children can reach
Preliminary checking: Before to install this control unit,
Verify that all the connected devices respect the technical characteristics mentioned in the table which follows.
Verify that a working and suitable life switch is installed upline the installation.
Verify that cables composing the installation, are suitable for it.
This product falls within the scope of the Directive 2012/19 / EU concerning the management of waste electrical
and electronic equipment (WEEE). The appliance must not be disposed of with domestic waste as it is made of
different materials that can be recycled at the appropriate facilities. Inquire through the municipal authority regarding
the location of the ecological platforms to receive the product for disposal and its subsequent correct recycling.
Furthermore, it should be remembered that, upon purchase of an equivalent appliance, the distributor is obliged to
collect the product for disposal free of charge. The product is not potentially dangerous for human health and the
environment, not containing harmful substance
s, but if abandoned in the environment negatively impacts on the
ecosystem. Read the instructions carefully before using the appliance for the first time. It is recommended that you
do not use the product for any purpose other than that for which it was intended, there being a danger of electric
shock if used improperly
The crossed-out bin symbol, on the label on the appliance, indicates the compliance of
this product with the regulations regarding waste electrical and electronic equipment.
Abandonment in the environment of the equipment or illegal disposal of the equipment
is punishable by law.
Declares: The control unit ID120 is compliant to following
directives:
- 2006/95/CE Low voltage directive.
- 2004/108/CE Electromagnetic compatibility.
Castiglione 10-11-2020
Courtesy light output (AUX)
Operating temperature range
G.R. SISTEMI AUTOMATICI DI APERTURA S.R.L.
To Next Page
Loading...