Initial operation
Charging the battery pack
The battery packs of your GRACE ONE E-Motorbike are integrated securely inside the
frame. In the top tube there is a large lithium ion cell battery installed and two small
batteries are housed in the down tube. All of the batteries are connected in parallel.
Lithium ion batteries are not subject to any memory effect. You can re-charge them at any
time, even after short rides. Proceed as follows in order to charge the batteries:
Insert the main plug of the original
charger provided. (220 V
Open the dust cap and connect the plug
of the charger with the charging port.
To charge the batteries, use the standard charger exclusively.
The charging process will start
automatically.
When the LED of the charger is lit up in
green, the batteries are fully charged.
The
indicator on the display will show a slight
metrological deviation.
Disconnect the plug connector and pull
the plug out of the receptacle.
To Next Page
Loading...
Need help?
General
