Remove the valve cap of the tube and the
knurled nut of the valve nozzle.
Bleed the
tube with at the valve pin using a pointed
instrument such as a ballpoint pen refill.
n to loosen the casing from the
Replace the tyre or the defective tube.
If you are putting on a new tyre, change the tube as well!
Pull one side of the tyre onto the rim. In the
process, please pay attention to the running
direction of the tyre that was printed by the
manufacturer.
Some makes of tyres don’t have any rotational direction printed on them.
Place the new tube into the rim well and
i
nsert the valve through the valve opening.
To Next Page
Loading...