Graco 16Y385 TrueCoat 360 User Manual

For portable spray applications of water-based and oil-based
non-flammable architectural paints and coatings only.
For Household Use Only.
Not approved for use in explosive atmospheres or hazardous locations.
ti24021a
Have a Question?
Call toll-free:
1-888-541-9788
Or visit us at:
www.paintsprayersbygraco.com
333394H
EN
Important Safety Instructions
Read all warnings and instructions in this manual and on the
unit, including the power cord. Be familiar with the controls and
the proper usage of the equipment. Save these instructions.
Owners Manual
Project Series Paint Sprayers
WARNING
To avoid fire and explosion, use only
non-flammable or water-based materials, or
non-flammable paint thinners. Do not use
materials which state “FLAMMABLE” on the
packaging. For more information about your
material, request MSDS from distributor or
retailer.
Use oil based materials outdoors or in a
well-ventilated area with a flow of fresh air.
Scan QR code or click on link
for operational video.
http://graco.com/tc360op

Graco 16Y385 TrueCoat 360 Specifications

General

Type	Airless Paint Sprayer
Power Source	Electric
Spray Tip Size	0.015 inches
Spray Pattern	Adjustable
Orifice Size	0.015 inches
Nozzle Type	Reversible
Spray Tip Technology	TrueCoat
Nozzle Included	Yes
Warranty	1 year limited
Max Pressure	3000 PSI
Flow Rate	0.27 GPM
Weight	2.8 lbs
Material	Plastic, Metal
Maximum Pressure	3000 PSI
Maximum Flow Rate	0.27 GPM

Summary

Important Safety Instructions

Electrical Safety Precautions

Proper Grounding Requirements

Ensuring correct grounding to prevent electric shock and circuit risks.

Extension Cord Safety Guidelines

Critical Hazard Warnings

Fire and Explosion Prevention

Measures to avoid ignition from flammable fumes, static, or sparks.

Skin Injection Hazard Awareness

Understanding the risks of high-pressure fluid injection into the body.

Electric Shock Hazard Prevention

Steps to prevent electric shock from improper grounding or wet conditions.

Additional Safety Warnings

Equipment Misuse Risks

Dangers associated with improper operation, fatigue, or unstable positioning.

Toxic Fluid and Fumes Exposure

Safety measures for handling toxic materials and their fumes.

Pressurized Parts and Chemical Reactivity

Hazards related to incompatible fluids reacting with sprayer parts.

Sprayer Component Identification

Initial Setup and Operation

Starting a New Job Procedures

Sprayer Startup and Refilling

How to Achieve Optimal Spraying

Spraying Techniques and Control

Spray Pattern Quality Optimization

Diagnosing and Fixing Spray Pattern Issues

Cleanup and Pressure Relief

Essential Pressure Relief Procedure

Safely releasing system pressure before performing maintenance or cleaning.

Cleaning the Sprayer System

Detailed Cleaning Procedures

Spray Tip Maintenance and Clearing

Unclogging the Spray Tip

Initial Sprayer Flushing

Troubleshooting Sprayer Issues

Common Sprayer Problems and Solutions

Guide to diagnosing and resolving typical operational problems.

Spray Pattern Diagnostics and Correction

Fixing Spray Pattern Irregularities