What to do if my Graco 190ES 261825 Paint Sprayer motor won't operate?
If the Graco Paint Sprayer motor won't operate, gradually increase the pressure setting to see if the motor starts. Also, the spray tip or fluid filter may be clogged, so relieve the pressure and clear any clogs or clean the gun filter.
Why won't the motor on my Graco Paint Sprayer operate?
If the Graco Paint Sprayer motor won't operate and you suspect the pump is frozen due to water or water-based paint, thaw the sprayer by placing it in a warm area. Ensure it is completely thawed before starting. If the paint has hardened, you will need to replace the pump packings.
What to do if the displacement pump connecting rod pin is the cause of my Graco 190ES 261825 Paint Sprayer motor not operating?
If the motor on your Graco Paint Sprayer won’t operate, check the displacement pump connecting rod pin. Push the pin into place and secure it with the spring retainer.
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode.
Do not use halogenated hydrocarbon solvents in pressurized aluminum equipment.
General| Maximum Pressure | 3000 PSI |
|---|---|
| Flow Rate | 0.38 GPM |
| Model | 190ES 261825 |
| Type | Airless Paint Sprayer |
| Power Source | Electric |
| Voltage | 120V |
| Amperage | 15A |
| Spray Pattern | Adjustable |
| Maximum Tip Size | 0.019 inch |
| Hose Length | 50 feet |
To Next Page
