Graco 190ES 261825 - Fan Replacement (Stand)

Fan Replacement (Stand)
311990J 17
Fan Replacement (Stand)
Removal
1. Relieve pressure, page 6. Disconnect power cord
from outlet.
2. Remove screws (11) and front cover (32).
3. Remove screws (11) and shroud (12).
4. Remove retaining ring (57b) on back of motor.
5. Pull off fan (57a).
Installation
1. Slide new fan (57a) on back of motor. Be sure fan
blades face motor.
2. Install spring clip (57b).
3. Install shroud (12) with screw (11).
4. Install front cover (32) with two screws (11).
12
11
57b
57a
32
11
ti23139a