Graco 190ES 261825 - Fan Replacement (Hi-Cart)

Fan Replacement (Hi-Cart)
16 311990J
Fan Replacement (Hi-Cart)
Removal
1. Relieve pressure, page 6. Disconnect power cord
from outlet.
2. Remove kick stand (66) (210
ES Series A).
3. Remove two screws (5) and toolbox (3) (190
ES,
210
ES Series A).
4. Remove two screws (11) and front cover (32).
5. Remove screw (13) and shroud (12).
6. Remove retaining ring (57b) on back of motor.
7. Pull off fan (57a).
Installation
1. Slide new fan (57a) on back of motor. Be sure fan
blades face motor.
2. Install spring clip (57b).
3. Install shroud (12) with screw (13).
4. Install front cover (32) with two screws (11).
5. Install toolbox (3) with two screws (5) (190
ES, 210ES
Series A).
6. Install kick stand (66) (210
ES Series A).
57b
57a
11
12
ti9151a
13
32