EasyManua.ls Logo

Graco ARGOS 80 - Securing Child & Booster Seat in Vehicle

Graco ARGOS 80
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
49
1. Place booster seat firmly against the back of
a forward-facing vehicle seat equipped with a
lap/shoulder belt only.
2. Place child in booster seat with child’s back
flat against back of booster seat.
3. Position lap/shoulder belt through shoulder
belt guide not underneath shoulder belt
guide . Belt should pass over vehicle belt
guide . Fasten buckle and pull up on the
shoulder belt to tighten.
4. If shoulder belt lies across child’s neck,
head or face, redirect belt over shoulder by
adjusting the head support setting, See page
50, Adjusting Head Support in Booster Mode.
5. The shoulder belt MUST lie across child’s
shoulders in red zone as shown .
17.0 Securing Child & Booster Seat in Vehicle
Use only the vehicle lap and shoulder belt system
when restraining the child in the booster seat.

Table of Contents

Related product manuals