58
21.0 Using the Tether
1. Check that tether is securely attached to
child restraint.
2. Fasten tether clip to anchor point .
3. Tighten adjustment belt to remove any slack .
4. To loosen, push button while pulling on the belt
as shown .
All LATCH seating positions have tether anchors. Always use tether if a vehicle tether anchor is
available, check your vehicle owner’s manual for the tether anchor location(s). If your vehicle is
not equipped with a tether anchor, it may be possible to install one. Contact your vehicle
dealership for the proper anchor location and installation.
To Next Page
Loading...
