65
HEAD SUPPORT COVER: clean with a damp
sponge using mild soap and cool water. If
necessary, cover may be removed for
cleaning.
1. Remove harness and crotch straps (see
Section 15.0, Harness Removal, p.41-45).
2. Remove elastic loops from head support as
indicated in
.
3. Remove head support cover as shown.
4. Machine wash cover in cold water on
delicate cycle and drip-dry. DO NOT USE
BLEACH.
5. To put the head support cover back on,
reverse preceding instructions.
26.0 To Remove Head Support and Seat Covers
To Next Page
Loading...
