Startup
310892B 15
Clearing Tip Clogs
1 Trigger gun and spray test
pattern. Slowly adjust pres-
sure to eliminate heavy
edges. Use smaller tip size
if pressure adjustment can
not eliminate heavy edges.
2 Hold gun perpendicular,
10-12 in. (25-30 cm) from
surface. Spray back and
forth. Use strokes over-
lapped by 50%. Start gun
movement before trigger-
ing gun and release trigger
before stopping gun move-
ment.
1 Release trigger, put trigger
safety ON. Rotate
SwitchTip. Take trigger
safety OFF and trigger gun
to clear the clog.
2 Put trigger safety ON,
return SwitchTip to original
position, take trigger safety
OFF and continue spraying.
KHDY\
HGJHV
WLD
WLD
VDIHW\
2))
WLD
VDIHW\
21
WLD
To Next Page
Loading...
