Why is the ON/OFF switch constantly illuminated on my Graco GX FF Paint Sprayer?
If the ON/OFF switch on your Graco Paint Sprayer is constantly illuminated and does not turn off, replace the control board, as it may be damaged.
How to fix a Graco GX FF with poor spray pattern?
If your Graco Paint Sprayer pump is primed, but you cannot achieve a good spray pattern, try the following: Clear any spray tip clog. Ensure the reversible spray tip is in the SPRAY position. Strain the paint to remove debris. Adjust the pressure by aligning the pressure control knob setting indicator to the desired spray setting. Clean or replace the InstaClean fluid filter and/or the gun fluid filter. If the spray tip is too large or worn, replace it. Replace the spray tip gasket and seal if they are worn or missing. Ensure the inlet strainer is clean and the suction tube is immersed in paint. Charge the battery or reduce the tip size if the battery has insufficient charge. Also, check if the inlet pump valve or outlet pump valve is worn or clogged with debris. If the material is too thi...
Details essential protective gear for preventing serious injury during operation.
Procedure for installing and removing the sprayer's battery pack.
Steps for filling the pump with paint for both stand and hopper models.
Recommendations for selecting spray tips and pressure settings for materials.
Steps and considerations for repairing the sprayer's pump.
General| Type | Airless Paint Sprayer |
|---|---|
| Max Pressure | 3000 PSI |
| Hose Length | 25 ft |
| Max. Working Pressure | 3000 PSI |
| Power Source | Electric |
| Motor Power | 0.625 HP |
To Next Page
