Graco J Series - Pump Selection Chart


PUMP SELECTION CHART
For Pump Model and Description Use Ram Model
10:1 Monark, Model 222–770, with Severe–Duty Check–Mate 450 Displacement Pump 223–634*
20:1 President, Model 222–768, with Severe–Duty Check–Mate 450 Displacement Pump 223–634*
34:1 Senator , Model 222–769, with Severe–Duty Check–Mate 450 Displacement Pump 223–634*
55:1 Bulldog, Model 222–778, with Severe–Duty Check–Mate 450 Displacement Pump 223–634*
15:1 Senator , Model 222–518, with Severe–Duty Displacement Pump 207–279
15:1 Senator , Model 222–489, with Nitralloy Displacement Pump 207–279
25:1 Senator , Model 222–525, with Severe–Duty Displacement Pump 207–279
25:1 Senator , Model 222–519, with Nitralloy Displacement Pump 207–279
10:1 Bulldog, Model 222–526, with Severe–Duty Displacement Pump 207–279
10:1 Bulldog, Model 204–287, with Nitralloy Displacement Pump 207–279
10:1 Bulldog, Model 207–172, with Stainless Steel Displacement Pump 207–279
or
954–285**
25:1 Bulldog, Model 222–527, with Severe–Duty Displacement Pump 207–279
25:1 Bulldog, Model 217–565, with Nitralloy Displacement Pump 207–279
40:1 Bulldog, Model 222–535, with Severe–Duty Displacement Pump 207–279
40:1 Bulldog, Model 220–448, with Nitralloy Displacement Pump 207–279
20:1 King, Model 222–539, with Severe–Duty Displacement Pump 207–279
20:1 King, Model 222–248, with Nitralloy Displacement Pump 207–279
20:1 King, Model 220–648, with Stainless Steel Displacement Pump 207–279
or
954–285**
55:1 King, Model 222–545, with Severe–Duty Displacement Pump 207–279
55:1 King, Model 217–566, with Nitralloy Displacement Pump 207–279
*
Mounting Kit 222–776 is required to mount a Check–Mate 450 Pump on Model 223–634 Ram.
** Stainless Steel Ram 954–285 does not include ram plate or tie rods.
NOTE: Model 207–279 Ram is shipped with optional seals (51 and 75), seal plates (76), an intake adapter (55), and
a mounting plate (58) for use with pumps not listed above (see the parts list on page 15). For application and
installation information regarding pumps not listed in this chart, contact your Graco representative or Graco
Technical Assistance at 1–800–543–0339.