Graco QuickShot 20B473 User Manual

For portable spray applications of architectural paints and coatings only.
Not approved for use in explosive atmospheres or hazardous (classified) locations.
For professional use only.
Important Safety Instructions
Read all warnings and instructions in this manual, on the unit, and in the battery and
charger manual before using the equipment. Be familiar with the controls and the
proper usage of the equipment. Save these instructions.
Important Medical Information
Read the medical alert card provided with the gun. It contains injection injury
treatment information for a doctor. Keep it with you when operating the equipment.
Additional Manual
Languages
3A9301C
EN
QuickShot™
Owners Manual

Graco QuickShot 20B473 Specifications

General

Brand	Graco
Model	QuickShot 20B473
Category	Power Tool
Language	English

Summary

Important Safety Instructions

Important Medical Information

Read the medical alert card for injection injury treatment info.

Models

Related Manuals

Lists other manuals related to this sprayer.

Important Grounding Information

Warnings

FIRE AND EXPLOSION HAZARD

Warnings about flammable fumes and ignition sources.

Oil-based or Flammable Materials

Static electricity risks with oil-based and flammable materials.

SKIN INJECTION HAZARD

Risks and precautions for high-pressure fluid injection injuries.

EQUIPMENT MISUSE HAZARD

Hazards associated with improper use and operation of equipment.

PRESSURIZED ALUMINUM PARTS HAZARD

Chemical reactions with aluminum in pressurized equipment.

BATTERY AND CHARGER COMPATIBILITY HAZARD

Compatibility requirements for batteries and chargers.

TOXIC FLUID OR FUMES HAZARD

Risks from toxic fluids and fumes.

PERSONAL PROTECTIVE EQUIPMENT

Recommended protective equipment for safe operation.

Know Your Sprayer

Know Your Controls

Prime Knob

Directs fluid to cup or spray tip; used for priming and purging air.

Spray Tip

Airless spray technology component; can be reversed to clear clogs.

Trigger

Controls the operation of the sprayer.

Trigger Lock

Prevents the spray gun from spraying when engaged.

Flow Control

Allows slowing down or speeding up spray application.

Grounding Instructions

Pails

Guidelines for using conductive metal pails with grounding.

Setup

Pressure Relief Procedure

Procedure to relieve system pressure before maintenance or transport.

Sprayer Setup

Steps to prepare the sprayer for use, including filter and cup setup.

Belt Setup

Instructions for attaching the sprayer to the belt holster.

Startup

Battery Installation and Preparation

Installing a charged battery and ensuring the storage plug is open.

Priming the Pump

Purging air from the pump by triggering the gun.

Priming the Hose and Spray Gun

Purging air and fluid from the hose and gun.

Finalizing for Spray

Turning the spray tip to the spray position to be ready.

Spraying

Flow Control

Adjusting pressure for precise spraying and reduced overspray.

Tip and Pressure Selection

Table for recommended spray pressure based on material type and tip size.

Spray Tip Orientation

Adjusting the spray tip guard for horizontal or vertical spraying.

Spray Techniques

Practicing basic spraying techniques for even finish.

Triggering Timing

Proper timing for pulling and releasing the trigger during spraying.

Spray Pattern Quality

Characteristics of a good spray pattern and how to identify issues.

Aiming Spray Gun

Technique for aiming the spray gun for overlapping strokes.

Clear Tip Clogs

Procedure to clear clogs from the spray tip.

Spray Tip Installation

Steps for installing the spray tip and guard.

Cup Refills

Procedure for refilling the material cup during spraying.

Pause in Spraying

Steps to prevent drying and clogging when pausing spraying.

Cleanup

Cleaning Sprayer

Steps for cleaning the sprayer after use.

Storage

Proper Storage Procedures

Steps to store the sprayer with Pump Armor fluid.

Reference

Cleaning Fluid Compatibility

Guidelines for flushing the system with different fluid types.

Recycling and Disposal

End of Product Life

Procedures for dismantling and recycling the product responsibly.

California Proposition 65 Warning

Consumer warning regarding cancer and reproductive harm.

Troubleshooting

Sprayer Diagnostics

Table of common sprayer problems, causes, and solutions.

Spray Pattern Diagnostics

Diagnosing and resolving issues with spray pattern quality.

Replacement Parts

Parts List

List of orderable replacement parts with part numbers and descriptions.

Technical Specifications

Graco Standard Warranty