Graco QuickShot 20B473 - Technical Specifications

Technical Specifications
3A9301C 35
Technical Specifications
Quickshot Sprayer
U.S. Metric
Max Working Pressure 2000 psi 14 MPa, 138bar
Weight
6.4 lb 2.9 kg
Dimensions:
Length
12 in. 30.5 cm
Width
6 in. 15.2 cm
Height
10.5 in. 26.7 cm
Storage Temperature Range ◆❖ 32° to 113° F 0° to 45° C
Operating Temperature Range ✓ 40° to 90° F 4° to 32° C
Storage Humidity Range 0% to 95% relative humidity, non-condensing
Sound Pressure Level
83.0 dBa
Sound Power Level † 94.0 dBa
Uncertainty K = 3 dBa
Vibration level (measured in
accordance with EN50580:2012)
Vibration total value
a
h
= 21.5 ft/s
2
Uncertainty K = 0.3 ft/s
2
Vibration total value
a
h
= 6.5 m/s
2
Uncertainty K = 0.1 m/s
2
Charger Power Source 100 - 120 Vac, 50 Hz, 15A, 1 Ø
230 Vac, 50 Hz, 16A, 1 Ø
Battery
Voltage (DC)
20 V MAX* 2.0 Ah Li-ion
Compact Battery Pack DEWALT
Maximum tip orifice
0.016 in. 0.41 mm
◆ Pump damage will occur if fluid freezes in pump.
❖ Damage to plastic parts may result if impact occurs in low temperature conditions.
✓ Changes in paint viscosity at very low or very high temperatures can affect sprayer
performance.
† All readings were taken within the priming mode at the assumed operator position. Sound power
levels were tested to ISO 3741 at 3.3 feet (1m).