Know Your Controls
3A9301C 9
Know Your Controls
Prime Knob
The Prime Knob directs fluid to either the
Cup or the Spray Tip. When priming, it is
used to purge air from the pump. Your
sprayer will not spray with air in the pump.
Turn Prime Knob up to PRIME position when
priming the sprayer or to relieve system
pressure.
Turn Prime Knob forward to SPRAY position
to spray fluid.
Spray Tip
The Spray Tip is the key to airless spray
technology. High pressure paint pumped
through the very small hole in the Spray Tip
comes out as a spray.
The Spray Tip has the ability to be reversed
and quickly clear clogs.
Trigger
The Trigger controls the operation of the
sprayer.
Trigger Lock
The Trigger Lock prevents the Spray Gun
from spraying when engaged and allows the
gun to spray when disengaged.
When the Trigger Lock is engaged, there is
no visible red showing on the Trigger Lock.
Engage Trigger Lock when not spraying.
Flow Control
The Flow Control allows you to slow down or
speed up when spraying.
To Next Page
Loading...
