308941
Rev. B
First choice when
quality counts.t
INSTRUCTIONS–PARTS LIST
INSTRUCTIONS
This manual contains important
warnings and information.
READ AND KEEP FOR REFERENCE.
Kits, Line Guide
For LineLazert 3500 & 5000 and LineLazer II 3900 & 5900
Model 241101, Series A
Short, for parking lot striping and road striping
Model 241102, Series A
Long, for road striping only
Installation
NOTE: Steps 1 and 2 apply to
LineLazer 3500 & 5000 only.
1. Drill two holes on both sides of chassis frame,
as shown in Fig. 1.
Fig. 1
8851A
1.0 in.
1.0 in.
A = 5.55 in. — LineLazer 3900 & 5900 (already drilled)
Front
4X Ĭ .330
through both walls
A = 6.55 in. — LineLazer 3500 & 5000 (must be drilled)
A
2. Mount one bracket (6) on right side of chassis
(viewed from front) with two flange screws (7) and
two lock nuts (8), as shown in Fig. 2.
Fig. 2
6, 7, 8
7
8
6
1
8850A
Right-side bracket is
already mounted on
LineLazer 3900 & 5900.
NOTE: Steps 3 and 4 apply to all LineLazers.
3. Slide left-side bracket (6) onto rod (1). Note
bracket orientation. Insert rod in right-side bracket.
4. Mount left-side bracket (6) on chassis with two
flange screws (7) and two lock nuts (8).
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
ECOPYRIGHT 1999, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001
To Next Page
General
