EasyManua.ls Logo

Graco field lazer s100 User Manual

Graco field lazer s100
67 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Use with Water-Based Materials / N’utiliser que des produits à base aqueuse /
Materialien auf Wasserbasis verwenden / Utilizar con materiales con base acuosa / Utilizzare con
materiali a base acquosa / Voor gebruik met materialen op waterbasis
Model 248942 / Modèle 248942 / Modell 248942 / Modelo 248942 / Modello 248942 / Model 248942
900 psi (6.2 MPa, 62 bar) Maximum Wor king Pressure / Pression de service maximum 900 psi (6,2 MPa, 62 bars) / Zulässiger
Betriebsüberdruck 900 psi (6,2 MPa, 62 bar) / Presión máxima de trabajo de 900 psi (6,2 MPa, 62 bar) / Pressione massima
d’esercizio 6,2 MPa (900 psi, 62 bar) / Maximum werkdruk 900 psi (6,2 MPa, 62 bar)
Patent pending / Brevet en cours / Patent angemeldet /
Pendiente de patente / Brevetto in corso di approvazione / Octrooi aangevraagd
Read all warnings and instructions
Lire toutes les mises en garde et instructions
Alle Warnhinweise und Anleitungen lesen
Lea todas las adver tencias e instrucciones
Leggere tutte le avvertenze e le istruzioni
Lees alle waarschuwingen en instructies
Related Manuals
309045
309053
ti5869b
310810S
Operation / Fonctionnement / Betrieb /
Funcionamiento / Funzionamento / Bediening
Field Laz er
, S100
EN FR DE
ES IT NL

Other manuals for Graco field lazer s100

Question and Answer IconNeed help?

Do you have a question about the Graco field lazer s100 and is the answer not in the manual?

Graco field lazer s100 Specifications

General IconGeneral
BrandGraco
Modelfield lazer s100
CategoryPaint Sprayer
LanguageEnglish

Summary

Product Information and Support

Related Manuals

Links to other Graco manuals for related equipment and accessories.

Safety Warnings and Hazard Identification

Fire, Explosion, and Injection Hazards

Covers fire/explosion risks and skin injection injuries from high-pressure fluids.

Pressurized Equipment and Moving Parts Hazards

Details risks from pressurized equipment, leaks, and moving machinery parts.

Safety Warnings: Operational and Health Hazards

Equipment Misuse Hazard

Risks of death or serious injury from incorrect operation or modification of equipment.

Pressurized Aluminum Parts Hazard

Chemical reactions and rupture risks with aluminum parts and specific solvents.

Suction, CO, Toxic, and Burn Hazards

Addresses suction, carbon monoxide, toxic fluids, and burn hazards.

Personal Protective Equipment and Regulations

Mandatory PPE use and California Proposition 65 warnings.

Initial Setup and Preparation

Unboxing, Handle, and Engine Checks

Instructions for unboxing, setting up the handle, and checking oil and fuel.

Engine Startup Procedure

Starting the Engine

Steps for priming the engine, setting choke, and pulling the starter rope.

Spraying Operations

Spray Shield Assembly and Adjustment

Instructions for assembling and adjusting spray shields for line width.

Test Stripe Spraying

Procedure for spraying a test stripe and adjusting gun height.

Stencil Spraying

Stencil Setup and Operation

Steps for loosening the knob, removing the gun, and activating the spray over the stencil.

Pressure Relief Procedure

Relieving System Pressure

Steps to safely relieve pressure from the sprayer system before maintenance or cleaning.

Cleanup and Flushing Procedures

Initial Flush, Shutdown, and Component Cleaning

Instructions for initial flush, engine shutdown, and cleaning components.

Tip Maintenance

Clearing Tip Clogs

Procedure for removing blockages from the spray tip using the SwitchTip.

Troubleshooting Guide

Engine and Pump Issues

Solutions for common engine and pump problems like starting, operation, and output.

Spraying and Pattern Problems

Diagnosing and fixing issues with spray pattern, line quality, and spitting.

Pump Service Procedures

Pump Removal and Installation

Detailed instructions for removing and installing the pump assembly.

Engine Service Procedures

Engine Removal and Installation

Steps for removing and installing the engine, including cable and filter connections.

Drive Housing Service

Drive Housing Removal and Installation

Steps for removing and installing the drive housing and associated components.

Clutch Housing Service

Clutch Housing Removal and Installation

Instructions for removing and installing the clutch housing and related parts.

Prime Valve Service

Prime Valve Removal and Installation

Steps for removing and installing the prime valve, handle, and base.

Engine Speed Adjustments

Adjusting Low Speed (Idle) RPM

Steps to set the engine idle speed to the correct RPM range.

High Speed RPM Adjustment

Setting High Speed RPM

Procedure for adjusting the engine speed to the high range (5700-5900 RPM).

Parts Identification

Exploded View Diagrams

Detailed diagrams showing all parts of the sprayer assembly with reference numbers.

Spray Tip Selection and Technical Data

Spray Tip Selection Guide

Table matching line width to appropriate spray tip nozzle.

Technical Specifications

Performance data including RPM, dimensions, weight, and sound levels.

Graco Warranty Information

Warranty Terms and Conditions

Details on Graco's limited warranty, exclusions, and buyer's sole remedy.

Graco Contact and Product Information

Product Information and Support

Details on obtaining the latest product information, ordering, and patent details.

Related product manuals