V
Valerie RichardsAug 21, 2025
Why is my Graco Sharpe Finex FX1000 spitting?
- AAnthony AndersonAug 21, 2025
Spitting in your Graco Paint Sprayer is caused by air getting into the paint stream.
To Next PageTo Next PageWhy is my Graco Sharpe Finex FX1000 spitting?
Spitting in your Graco Paint Sprayer is caused by air getting into the paint stream.
Why is my Graco Sharpe Finex FX1000 Paint Sprayer producing a thick, dimpled finish?
A thick, dimpled finish (resembling orange peel) from your Graco Paint Sprayer is caused by holding the gun too close to the surface. Hold the gun about 6-8 inches (150-200 mm) from the surface.
What to do if the needle on my Graco Sharpe Finex FX1000 feels sluggish?
If the needle on your Graco Paint Sprayer feels sluggish, you should clean and lubricate it.
What to do if my Graco Sharpe Finex FX1000 Paint Sprayer's atomization air pressure is too high?
If the atomization air pressure is set too high on your Graco Paint Sprayer, reduce the air pressure.
What to do if my Graco Sharpe Finex FX1000's fluid is too thick?
If the fluid you're using with your Graco Paint Sprayer is too thick for gravity feed, thin the material.
What to do if my Graco Paint Sprayer cup is empty?
If the cup of your Graco Paint Sprayer is empty, fill it.
What to do if my Graco Sharpe Finex FX1000 Paint Sprayer cup is almost empty?
If the cup of your Graco Paint Sprayer is almost empty, fill it.
What to do if the fluid nozzle on my Graco Paint Sprayer is too loose?
If the fluid nozzle on your Graco Paint Sprayer is too loose, tighten it.
What to do if the air cap on my Graco Sharpe Finex FX1000 Paint Sprayer is loose?
If the air cap on your Graco Paint Sprayer is loose, tighten it.
What to do if the packing nut on my Graco Paint Sprayer is too tight?
If the packing nut on your Graco Paint Sprayer is too tight, loosen it.
General| Brand | Graco |
|---|---|
| Model | Sharpe Finex FX1000 |
| Category | Paint Sprayer |
| Language | English |
Hazards related to flammable fumes and ignition sources in the work area.
Risks associated with improper operation, maintenance, or modification of equipment.
Dangers of fluid splashing from pressurized components causing injury.
Serious health risks from exposure to toxic fluids or fumes.
