A
Anthony MichaelSep 2, 2025
What to do if the fluid nozzle on my Graco Paint Sprayer is too loose?
- AallenpachecoSep 2, 2025
If the fluid nozzle on your Graco Paint Sprayer is too loose, tighten it.
To Next PageTo Next PageWhat to do if the fluid nozzle on my Graco Paint Sprayer is too loose?
If the fluid nozzle on your Graco Paint Sprayer is too loose, tighten it.
What to do if my Graco Sharpe Finex FX1000 Paint Sprayer cup is almost empty?
If the cup of your Graco Paint Sprayer is almost empty, fill it.
What to do if my Graco Paint Sprayer cup is empty?
If the cup of your Graco Paint Sprayer is empty, fill it.
What to do if my Graco Sharpe Finex FX1000's fluid is too thick?
If the fluid you're using with your Graco Paint Sprayer is too thick for gravity feed, thin the material.
What to do if my Graco Sharpe Finex FX1000 Paint Sprayer's atomization air pressure is too high?
If the atomization air pressure is set too high on your Graco Paint Sprayer, reduce the air pressure.
What to do if the needle on my Graco Sharpe Finex FX1000 feels sluggish?
If the needle on your Graco Paint Sprayer feels sluggish, you should clean and lubricate it.
Why is my Graco Sharpe Finex FX1000 Paint Sprayer producing a thick, dimpled finish?
A thick, dimpled finish (resembling orange peel) from your Graco Paint Sprayer is caused by holding the gun too close to the surface. Hold the gun about 6-8 inches (150-200 mm) from the surface.
General| Brand | Graco |
|---|---|
| Model | Sharpe Finex FX1000 |
| Category | Paint Sprayer |
| Language | English |
Hazards related to flammable fumes and ignition sources in the work area.
Risks associated with improper operation, maintenance, or modification of equipment.
Dangers of fluid splashing from pressurized components causing injury.
Serious health risks from exposure to toxic fluids or fumes.
