311020 15
Clutch Housing
Removal
1. Fig. 10. Remove four cap screws (186) and lock
washers (188) which hold clutch housing (85) to
engine.
2. Remove screw (177) from under mounting
plate (96).
3. Pull off clutch housing (85).
Installation
1. Fig. 10. Push on clutch housing (5).
2. Install four cap screws (186) and lock washers
(188) and secure clutch housing (85) to engine.
Torque to 200 in-lb (22.6 NSm).
3. Install cap screw (177) from beneath mounting
plate (96). Torque to 26 ft-lb (35.2 NSm).
ti6643a
Fig. 10
186
188
85
88
177
96
To Next Page
Loading...
