EasyManua.ls Logo

Graco LTS 15 - Specifications and Getting Started; Model Specifications Overview; Cart Setup Guide

Graco LTS 15
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications
2 313036N
Specifications
This equipment is not intended for use with flammable or combustible materials used in places such as cabinet
shops or other “factory”, or fixed locations. If you intend to use this equipment in this type of application, you must
comply with NFPA 33 and OSHA requirements for the use of flammable and combustible materials.
Getting Started
Fold-n-Store
Cart (ProLTS Sprayers Only)
1. Unfold Fold-n-Store
handle (a) and align
as shown.
2. Tighten wingnuts (b).
3. Grasp cart handle
securely with one hand.
With the other hand, lift
and pull handle (a)
located in front of
sprayer frame, toward
you. Lift up front of
sprayer until you hear a
click and the cart is
locked in place.
4. Install hose rack (d) to frame
handle. Install lock nuts.
Tighten securely.
5. Secure power cord in clip
(e) located underneath
storage compartment.
Model Name Series
Dispense Rate
gpm (lpm)
Hose Length and
Diameter
Gun
Model
Maximum Working
Pressure
PSI MPa bar
M
AGNUM
LTS 15
A, B, C
0.27 gpm
(1.02 lpm)
1/4 in. x 25 ft
(6.4 mm x 7.5 m)
SG2 3000 21 207
MAGNUM
LTS 17
A, B
0.31 gpm
(1.17 lpm)
1/4 in. x 25 ft
(6.4 mm x 7.5 m)
SG2 3000 21 207
MAGNUM
ProLTS 17
A
0.34 gpm
(1.29 lpm)
1/4 in. X 50 ft
(6.4 mm x 15 m)
SG3 3000 21 207
MAGNUM
ProLTS 19
A
0.38 gpm
(1.44 lpm)
1/4 in. X 50 ft
(6.4 mm x 15 m)
SG3 3000 21 207
a
b
ti9675a
c
ti9679a
d
ti9369a
ti9719a
e

Related product manuals