Storage
24 332643B
5. When storage fluid comes out of prime tube (5-10
seconds) turn power switch OFF.
6. Move Prime/Spray valve to SPRAY to keep storage
fluid in sprayer during storage.
Stowing Sprayer
1. Screw inlet screen onto suction tube.
2. Coil hose. Leave it connected to sprayer. Wrap
hose around sprayer stand.
3. Secure a plastic bag around suction tube to catch
any drips.
4. Store sprayer indoors.
ti2018a
ti13960a
NOTICE
• To prevent damage to the equipment, make sure all
water is drained out of sprayer and hoses before
storing.
• Do not allow water to freeze in sprayer or hose.
• Do not store sprayer under pressure.
ti9433a
ti14966a
ti5552a
To Next Page
Loading...
