Graco MAGNUM PROJECT PAINTER PLUS

Specifications
332643B 3
Specifications
This equipment is not intended for use with flammable or combustible materials used in places such as cabinet shops
or other “factory”, or fixed locations. If you intend to use this equipment in this type of application, you must comply with
NFPA 33 and OSHA requirements for the use of flammable and combustible materials.
Model Name Series
Maximum
Dispense
Rate gpm
(lpm)
Hose Length
and Diameter
Gun
Model
Maximum Working
Pressure
bar MPa PSI
Project Painter
Plus
A
0.91 lpm
(0.24 gpm)
6.4 mm x 7.5 m
(1/4 in. x 25 ft)
SG2 207 21 3000