EasyManua.ls Logo

Graco Magnum ProX9

Graco Magnum ProX9
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operation
Magnum X5, X7, ProX9 Airless Sprayer
332689D
EN
For portable spray applications of architectural paints and coatings
Models 16J750, 16J751, 16W123
IMPORTANT SAFETY INSTRUCTIONS
Read all warnings and instructions in this manual
and on the sprayer cord. Save these
instructions.
See page 3 for model series information including
dispense rate, recommended hose length, guns, and
maximum working pressure.
FIRE AND EXPLOSION HAZARD:
Do not spray or clean
with flammable materials. Use water-based materials only.
WARNING
ti22084a
ti22085a
ti22143a
Magnum X7
Model: 16J751
Series B
Magnum ProX9
Model: 16W123
Series A
Magnum X5
Model: 16J750
Series B

Other manuals for Graco Magnum ProX9

Questions and Answers:

Graco Magnum ProX9 Specifications

General IconGeneral
BrandGraco
ModelMagnum ProX9
CategoryPaint Sprayer
LanguageEnglish

Summary

Magnum X5, X7, ProX9 Airless Sprayer Introduction and Safety

Important Safety Instructions

Read all warnings and instructions for safe operation.

Model Identification Overview

Introduction to the Magnum X5, X7, ProX9 airless sprayers.

Sprayer Technical Specifications

Model Specifications Table

Detailed specifications for X5, X7, and ProX9 models.

Warnings and Grounding Requirements

Grounding and Extension Cord Safety

Essential guidelines for electrical grounding and extension cord use.

Fire, Explosion, and Injection Hazards

Fire and Explosion Prevention

Critical warnings about flammable materials and fire prevention.

Skin Injection Hazard

High-pressure fluid injection risks and treatment.

Equipment Misuse and Other Hazards

Equipment Misuse and Electric Shock

Dangers of misusing equipment and electric shock risks.

Chemical and Burn Hazards

Warnings about chemical reactions and burns from hot surfaces.

Moving Parts and Personal Protective Equipment

Moving Parts Hazard

Risks associated with moving mechanical components.

Personal Protective Equipment (PPE)

Recommended protective gear for safe operation.

Magnum X5 Component Identification

X5 Component List

Detailed list and description of Magnum X5 sprayer parts.

Magnum X7 and ProX9 Component Identification

X7 ProX9 Component List

Detailed list and description of X7 and ProX9 sprayer parts.

Grounding and Electric Requirements

Thermal Overload

Explanation of the motor's thermal overload switch.

Sprayer Operation Procedures

Trigger Lock and Pressure Relief

How to engage the trigger lock and relieve system pressure.

Pressure Control Knob Settings

Guide to adjusting the pressure control knob for spraying.

Spraying Techniques and Gun Handling

Guidance on spray patterns, trigger control, and aiming.

Setup: Prime and Flush Storage Fluid

Prime and Flush Procedure

Steps to remove storage fluid before first use.

Setup: Install Tip and Guard on Gun

Tip and Guard Installation

Instructions for attaching the spray tip and guard.

Setup: Tip Management and Selection

Unclogging the Spray Tip

Steps to clear a clogged spray tip.

Tip Selection Guide

Guidance on selecting appropriate spray tips for different coatings.

Shutdown and Cleaning: Pail Flushing

Pail Flushing Procedure

Method for short-term flushing of the sprayer.

Shutdown and Cleaning: Power Flush

Power Flush Procedure

Faster flushing method for water-based coatings.

Shutdown and Cleaning: Filters and Gun

Cleaning InstaClean Filter

How to clean the InstaClean fluid filter.

Cleaning the Spray Gun

Instructions for cleaning the spray gun components.

Storage: Short and Long Term

Short Term Storage

Procedures for storing the sprayer for up to 2 days.

Long Term Storage

Procedures for storing the sprayer for more than 2 days.

Storage: Stowing the Sprayer

Stowing Sprayer Instructions

Guidelines for properly storing the sprayer after use.

Maintenance and Service

Caring for the Sprayer

General advice on keeping the sprayer clean and in good condition.

Paint Hoses and Tips Maintenance

Inspection and maintenance of hoses and spray tips.

Pump Check Valves and Packings

Information on pump valve and packing maintenance.

Troubleshooting: Motor and Power Issues

Motor Not Running Issues

Solutions for motor not running or power supply problems.

Troubleshooting: Pump Priming Problems

Pump Not Priming Solutions

Troubleshooting steps for pump not priming.

Troubleshooting: Pressure and Spray Issues

Pressure Build-up and Spray Pattern Issues

Addressing issues with pressure build-up and spray patterns.

Dribbling or Spurting Paint

Solutions for paint dribbling or spurting from the gun.

Troubleshooting: Spray Pattern and Application

Poor Spray Pattern Issues

Addressing issues with achieving a good spray pattern.

Spraying Application Problems

Solutions for running paint or inadequate coverage.

Troubleshooting: Intermittent Operation and Leaks

Intermittent Motor Operation

Solutions for motor running intermittently or shutting off.

Paint Leaks and Trigger Issues

Addressing paint leaks and inability to trigger the gun.

Technical Data

Performance and Dimensional Specifications

Detailed technical data, including dimensions and ratings.

Graco Standard Warranty

Warranty Terms and Conditions

Details of Graco's warranty coverage and limitations.

Related product manuals