Shutdown and Cleaning
332689D 23
NOTE: Step 16 is for returning paint in hose back to
paint pail. One 50-ft (15-m) hose holds approximately
1-quart (1-liter) of paint.
16. To preserve paint in hose:
a. Point gun into paint pail.
b. Unlock gun trigger lock.
c. Pull and hold gun trigger.
d. Move Prime/Spray valve to SPRAY.
e. Turn power switch ON.
f. Continue to hold gun trigger until you see paint
diluted with water starting to come out of gun.
17. While continuing to trigger gun, quickly move gun to
redirect spray into waste pail. Continue triggering
gun into waste pail until water coming out of gun is
relatively clear.
18. Stop triggering gun. Engage trigger lock.
19. Move prime/spray valve to Prime.
20. Turn power switch OFF.
21. Turn off garden hose. Close valve on Power Flush
attachment.
22. Unscrew Power Flush attachment from suction
tube.
23. Clean InstaClean™ Fluid Filter and gun, page 24.
24. Fill unit with Pump Armor™ storage fluid. Read
Long Term Storage, page 25.
To Next Page
Loading...
Need help?
General
