Graco Magnum

STORAGE FLUID
Remove Power Flush attachment from suction tube.
Submerge suction tube in Pump Armor.
™
Turn Prime/Spray Valve down to PRIME . Turn Power
Switch ON . Turn Pressure Control Knob to Prime/Clean
setting.
When Pump Armor comes out of drain tube,
turn Pressure Control Knob to lowest setting
and Power Switch OFF .
Turn Prime/Spray Valve to
SPRAY and install inlet
strainer on suction tube for storage.
Every Graco purchase comes
with A+ Customer Service.
Questions?
(888)541-9788
magnum.graco.com/aplus
1
3
2
4
magnum.graco.com/magop
4
3A3526 Revision B, May 2016. Original Instructions. This Quick Guide contains English.
Source Manuals: 3A3208, 3A3529 MM 3A3526. Copyright 2016
Scan QR code for
Operational Video