To Next PageTo Next PageWhy does the air motor of my Graco Paint Sprayer “bounce” at the bottom of the stroke?
If the air motor of your Graco Paint Sprayer “bounces” at the bottom of the stroke, it is caused by a damaged top pilot valve (213). Replace the top pilot valve (213).
Why does the air motor of my Graco Paint Sprayer “bounce” at top of stroke?
If the air motor of your Graco Paint Sprayer “bounces” at the top of the stroke, this is due to a damaged bottom pilot valve (213). Replace the bottom pilot valve (213).
Why is air continuously exhausting around the air motor piston rod of my Graco Paint Sprayer?
If air is continuously exhausting around the air motor piston rod of your Graco Paint Sprayer, it indicates damaged u-cups (207). Replace the piston rod u-cups (207).
General| Type | Airless |
|---|---|
| Max Pressure | 3000 psi |
| Hose Length | 50 ft |
| Maximum Working Pressure | 3000 psi |
| Pump Type | Piston |
| Voltage | 120V |
| Nozzle Size | 0.015-0.021 inches |
| Horsepower | N/A (Air-powered) |
| Amperage | N/A (Air-powered) |
| Tip Size Range | 0.009 to 0.021 inches |
| Applications | Wood Finishing |
| Fluid Compatibility | Wide range of fluids, including paints, stains, lacquers, and coatings. Check specific model for compatibility. |
