Operation
334641E 17
Digital Display (if applicable)
Most models are equipped with a digital
display. This section explains how to use this
feature.
Pressure Display
1. Perform Pressure Relief
Procedure, page 9.
2. Plug sprayer into grounded outlet. Turn
ON/OFF switch to ON position.
3. The pressure is displayed. Dashes
indicate pressure is less than 200 psi (14
bar, 1.4 MPa).
4. Press and hold display button to change
pressure units (psi, bar, or MPa).
Stored Data Display
1. Turn ON/OFF switch to OFF position.
ti2786a
To Next Page
Loading...
