EasyManua.ls Logo

Graco RTX1400 - User Manual

Graco RTX1400
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
3A3258E
EN
Operation, Parts
RTX1400 & RTX2000
Interior Texture Sprayers
For water-Based Materials Only.
Models: RTX1400si & RTX2000pi
70 psi (4.8 bar, 0.48 MPa) Maximum Working Pressure
Important Safety Instructions
Read all warnings and instructions in this manual and related manuals.
Be familiar with the controls and the proper usage of the equipment.
Save these instructions.
Related Manuals
RTX1400si Gun – 311777 RTX2000pi Gun – 3A3373
t
i
27336a
Use only genuine Graco replacement parts.
The use of non-Graco replacement parts may void warranty.

Questions and Answers

  • K
    Kevin SmithSep 9, 2025
    What to do if Graco RTX1400 Paint Sprayer continues to run after releasing the trigger?
    • D
      Dean RoseSep 10, 2025
      If your Graco Paint Sprayer continues to run even after you release the gun trigger, here are a few things to investigate: * The pressure switch might be damaged, requiring replacement. * There could be a leak in the compressed air system. Check the gun, twin line hose, or internal system to locate the leak. Reseal any leaky fittings or replace the hose if needed. * The flow switch might be stuck, necessitating replacement.
  • R
    Robert FranklinSep 12, 2025
    What causes a Graco Paint Sprayer gun to not shut off?
    • T
      Taylor McfarlandSep 12, 2025
      If the gun on your Graco Paint Sprayer will not shut off, the possible causes are: * Worn nozzle or needle. Replace worn parts. * Debris in needle passage. Clean it.
  • S
    Stephen Sosa MDSep 14, 2025
    Why won’t the needle adjustment on my Graco RTX1400 Paint Sprayer adjust?
    • P
      petersenanthonySep 14, 2025
      If the needle adjustment on your Graco Paint Sprayer won’t adjust, consider the following: * The threads might be dirty. Clean the threads. * The nozzle might not be on the gun. Put the nozzle on the gun.
  • M
    Michael YoungSep 16, 2025
    What to do if quick disconnect doesn't stay connected on Graco Paint Sprayer?
    • S
      Sarah ShannonSep 16, 2025
      If the quick disconnect on your Graco Paint Sprayer does not stay connected, it may be due to: * A dirty or corroded fitting. Clean it thoroughly, soak it in oil, and apply a few drops of light oil.

Summary

Models

Warnings

Pressurized Equipment Hazard

Risks from fluid pressure, leaks, or component ruptures.

Electric Shock Hazard

Safety measures to prevent electrical shock.

Fire and Explosion Hazard

Precautions against flammable fumes and ignition sources.

Equipment Misuse Hazard

Risks associated with improper operation and handling of equipment.

Personal Protective Equipment

Recommended protective gear for safe operation.

Component Identification RTX1400 si

Component Identification RTX2000 pi

Preparation

Pressure Relief Procedure

Procedure to safely relieve pressure before servicing or cleaning.

Grounding

Ensuring proper electrical grounding for safety and shock prevention.

Soft Start;Smart Start System (RTX2000 pi only)

Explanation of the sprayer's soft start and smart start features.

Setup

Mixing Material

Operation

Texture Spraying

Guidance on applying texture materials with the sprayer.

Recommended Nozzle Selection Charts

Charts for selecting appropriate nozzles for different applications.

Adjusting the System

Tips for balancing fluid output and atomization for best spray.

Smart Start;Smart Start Operation RTX2000 pi

Detailed explanation of RTX2000pi start-up features.

Shutdown and Cleanup

Clean Material Hopper

Instructions for removing and cleaning the material hopper.

Maintenance

Texture Hoses

Inspection and care instructions for texture hoses.

Tips

Maintenance and cleaning advice for spray tips.

Troubleshooting

RTX1400 si Sprayer

RTX2000 pi Sprayer

Gun & Hose

Wiring Diagram

Technical Specifications

Graco Standard Warranty

Graco RTX1400 Specifications

General IconGeneral
BrandGraco
ModelRTX1400
CategoryPaint Sprayer
LanguageEnglish

Related product manuals