Motor Repair
309586R 13
4. Using one hand to support
motor, slide rod (F) through
motor bracket.
5. Replace c-clip (E).
For steps 6-9 refer to illustration below Step 9.
6. Reattach blue wire to switch (D).
7. Replace ground nut (C).
8. Reattach yellow wire (B).
9. Secure all wires together with wire tie (A), making
sure the wires to not touch air line (H) and the motor
can swing the full travel (I) without stressing wires.
10. Reconnect RotoFlex Pump hose, page 6.
11. Replace shroud. Tighten bolts (6).
TI2861A
F
ti30
E
(H)
(C)
(I)
ti3117a
(A)
(B)
(D)
To Next Page
Loading...
